MEITRACK VT300 User Guide
Creation Date:
Update Date:
Note:
F=0, to turn off this function; (default)
F=1, Sends SMS to the authorized phone number.
T: Preset phone number. Max.16 digits.
Example:
W000000,003,1,1,88888888
SOS Button Connection:
Connect the SOS button and wires as below picture shows:
Note: input voltage to Input must not over 45V.
After above authorization is completed, and the SOS is pressed, an SOS SMS - “SOS Alarm” will be sent to the preauthorized phone
number. Then a message with longitude and latitude will follow.
(Note: An SOS button is already connected to VT300 in standard packing)
9. Speeding Alarm
Command: W******,005,XX
Description: Turn on speeding alarm. When the tracker speeds higher than the preset value, it will send an SMS to the phone
number for SOS.
Note: XX is the preset value of speed and in 2 digits.
=00 , to turn off this function;
=[01, 20] (unit: 10Km/h).
Example: W000000,005,08
When the tracker’s speed is over 80km/h, an SMS alarm will be sent out.
10. Movement/Geo-fence
10.1 Movement Alarm
Command: W******,006,X
Description: When the tracker moves out of a preset circle scope, it will send an SMS alarm to the authorized phone number for
SOS.
Note:
1. X is the preset radii to the tracker’s original place.
=0, to turn off this function.
=1, 30m =2, 50m =3, 100m =4, 200m
Input
White
SOS Button
Copyright © 2013 Meitrack Group All rights reserved.
- 12 -
Commentaires sur ces manuels